Dhismaha Bakhaarka ee Qaab-dhismeedka Birta ee Culus ee Hore loo Marinjiyeeyay
Dhismayaasha Bakhaarka ee Qaab-dhismeedka Birta ah waxay si fiican u dabooli karaan baahiyaha kaydinta xamuulka iyo wareejinta saadka sababtoo ah dhismayaasha qaab-dhismeedka birta waxay leeyihiin faa'iidada kala-goysyada cad, waxay bixin karaan booska ugu muhiimsan ee isticmaalka, mana u baahna taageero tiirar gudaha ah. Markaa ma la kulmi doontid caqabado marka aad kaydinayso alaabta ama aad waddo fargeeto, waxaadna ku dari kartaa qaab-dhismeed mezzanine ah si aad ugu isticmaasho xafiis bakhaar ama meel kaydin oo dheeraad ah.
Qaab-dhismeedka ugu Muhiimsan | Tiir | Q355/Q235 H- steel, column Box ayaa sidoo kale la heli karaa |
Qoryo, Qoryo | Q355/Q235 H- bir ah | |
Ikhtiyaarada habaynta dusha sare | 1. Rinjiga Epoxy-ka ee zinc-ka hodanka ku ah + rinjiga dhexe ee epoxy mica (dhumucdiisuna waa 120μm) | |
2. Galvanization kulul oo lagu dhex milmo | ||
Qaab-dhismeedka Hoose | Purlin | Q355B, qaybta birta C/Z, galvanization 275g/m2 |
Qalabka xagasha | Q235B, birta L- | |
Qalabka iskutallaabta ah | Q235B baar wareegsan, L-bir ah | |
Baarka xidhmada | Q235B, tuubo wareegsan | |
Qalabka baytariga | Q235B, baar wareegsan | |
Nidaamka Saqafka | Ikhtiyaarada guddiga saqafka | 1. Guddi sandwich ah oo dahaaran, PU, dhogor dhagax ah, faybar galaas ah, EPS. Laba dhinac waa xaashi bir ah. Dhumucda guddiga saqafka 50mm/75mm/100mm, |
2. Saxan bir ah, dhumucdiisuna waa 0.4mm/0.5mm/mm | ||
Ikhtiyaarada biyo-mareenka | 1. Biyo-mareen bir ah oo la galvanized ah, dhumucdiisuna waa 2.0mm/2.5mm, 3.0mm | |
2. Biyo-mareen bir ah oo la rinjiyeeyay, oo hore loo dhammeeyay, dhumucdiisuna tahay 0.4mm/0.5mm/0.6mm | ||
Tuubada hoose | tuubo PVC ah | |
Birta iftiiminaysa iyo daboolka | Xaashi bir ah oo loogu talagalay daboolka saqafka, daboolka dhammaadka derbiga ee la qaadi karo iyo daboolka geeska | |
Xulashooyinka | Saqafka saqafka ah ee 1.8mm xaashi PVC ah iyo hawo-mareen bir ah oo aan miridh lahayn | |
Nidaamka Derbiga | Ikhtiyaarada guddiga derbiga | 1. Guddi sandwich ah oo dahaaran, PU, dhogor dhagax ah, faybar galaas ah, EPS. Laba dhinac waa xaashi bir ah. Dhumucda guddiga saqafka 50mm/75mm/100mm, |
2. Saxan bir ah, dhumucdiisuna waa 0.4mm/0.5mm/mm | ||
3. Darbiga lebenka (oo uu bixiyo macmiilku) | ||
Albaab | 1. Albaabka duuban ee gaariga xamuulka ah, cabbirka loo habeeyay | |
2. Albaab simbiriirixan oo loogu talagalay gaariga xamuulka ah, cabbirka loo habeeyay | ||
3. Albaabka gelitaanka, albaabka birta ah, albaabka galaaska iwm. | ||
Daaqadda | Qaab-dhismeedka PVC ama Aluminium, Go'an, lulid, simbiriirixan, louver iwm, cabbir la habeeyay | |
Birta iftiiminaysa iyo daboolka | Daboolka dhammaadka xaashida birta ah iyo daboolka geeska | |
Qalabka iyo qalabka lagu dhejiyo |
| Boolal barroosin ah, boolal kiimiko ah, boolal xoog badan, boolal caadi ah, boolal is-qodaya, rivet iwm. |
Xulashooyinka Kale |
| Wiishashka 5T, 6T, 10T, 16T, 30T iwm. |
Annagoo kaashanayna barnaamijyada casriga ah ee naqshadeynta sida AutoCAD, PKPM, 3D3S, SAP2000, TSSD, Tekla Structures (Xsteel), 3DS MAX, waxaanu macaamiisha oo dhan u fidinaa adeeg naqshadayn iyo faahfaahin dhammaystiran.
Maadaama walxo cayriin ah, hab kasta oo wax lagu farsameeyo, alaab la dhammeeyay; hab kasta, waxaan leenahay shaqaale xirfad leh oo xakameyn tayo leh si ay u tijaabiyaan tayada; hubi in hab kasta oo wax soo saar la dhammeeyay uu u qalmo, sidaa darteed tayada wax soo saarka la dhammeeyay ee ugu dambeeya aad ayaa loo dammaanad qaaday;
3. Adeegga Rakibaadda
Waxaan ku siin karnaa buug-gacmeedka oo ay ku jiraan sawirrada iyo sawirrada, ama fiidiyowyo kaa caawinaya rakibidda. Waxaadna abaabuli doontaa dadka deegaanka si ay u rakibaan.
Waxaad u diri kartaa dadkaaga (injineerada ama farsamo yaqaanada) shirkaddayada si ay u bartaan faahfaahinta rakibidda.
